Tips for Air Conditioning Service
If your AC is not working properly and your home is experiencing discomfort, it’s time to check. An air conditioning service includes an inspection, tuneup, and maintenance. The technician will review his findings and make recommendations to help improve your system’s performance. In many ways, your AC’s performance is a good indicator of how often maintenance is needed. Luckily, there are many tips you can follow to keep your system running smoothly.
Cleaning the condensate drainage
Clean the condensate drain before an air conditioner service raleigh to get rid of any buildup. A shop vacuum or wet vac can be used to remove the debris. To clear the drain, a plumber’s snake may also be used. Before proceeding with the cleaning, the technician should check for a blockage in the drain. After the cleaning is done, the technician should turn off the system. The technician should then inspect the drain line to see if there are any signs of stagnant waters. Water that is too dirty can make it unpleasant to smell. To prevent mold growth, the cleaner should clean out the drain.
Water leaks can be caused by a clogged condensate drainage. It can be difficult to identify this from a leaking roof or plumbing. Water damage to the mechanical equipment or drywall can occur if the condensate drain pan overflows. A clogged drain tube can also affect the AC system’s efficiency. A blocked drain pan can cause a foul-smelling smell that can be unpleasant for your family.
Check for leaks
Air conditioners can have leaks. It is a good idea before you recharge them. It would be a waste to recharge an air conditioner only to discover that it is leaking. There are several methods to detect air conditioning system leaks. Learn how to spot them and prevent them from happening. Here are some tips.
The evaporator coil can be checked to identify leaks in air conditioners. This section cools the air conditioner by collecting moisture. This moisture then flows out the drain to the outdoors. When this drain line is clogged with dirt or mold, the moisture cannot flow down the drain. Leakage occurs when the drain line becomes blocked. The leak will usually be minor, but it can cause the system’s failure.
Clean the evaporator coil
When it comes to air conditioning maintenance, one of the most important steps is cleaning the evaporator coil. The coil is located inside the indoor handling unit and is accessible through an access panel. Turn off the thermostat to clean it. Then, remove the access panel. Take a small air compressor, and a shopvac. Use compressed air to blow off the dirt and debris from the evaporator coil.
A foaming evaporator coil cleaner can be purchased and used to clean the coil. The foam will remove dirt and debris from your coil and drain into the condensate drainage. You may need to do a second cleaning if the buildup is too severe. A brush can also help you see the coil better. You can also apply bleach.
Cleaning condenser fan
It is important to clean the condenser fan after air conditioning service, in order to keep it working efficiently. Dirt and debris will decrease the effectiveness of the cooling system and cause energy costs to rise. Regular cleaning can also reduce the risk of damaging the compressor. The technician will check the condenser fan for wear or damage and clean the grate, coils and other parts with compressed air.
The condenser’s fins are extremely fragile and can be bent or damaged during cleaning. You can straighten your fins using a fin-straightening machine. After cleaning the condenser, place the fan cage back into place and turn the electrical disconnect back on. Listen for ticks or pings in order to confirm that the fan is functioning properly. If the condenser fan doesn’t spin properly, it could indicate a bigger problem.
Checking refrigerant levels
Your air conditioner system is dependent on the refrigerant. Low refrigerant levels can cause problems with your air conditioning system. Low levels can pose a danger to your safety. It is important to get your AC serviced regularly to avoid this problem. Many HVAC technicians can use digital gauges to check the levels. The AC will run efficiently if it is checked before it starts cooling.
Low refrigerant may cause warm air to escape from the vents. In some cases, it might be due to clogged filters, a broken compressor, or even the wrong thermostat settings. It is possible to check the refrigerant level by yourself. You don’t need to hire a professional for air conditioning services.